Gaam Electric is manufacturer of welding Rectifier, MIG / MAG,
plasma cutters, TIG machines.
Gaam Electric has licence of Merkle, Germany.

GAAM ELECTRIC is proud to introduce a new improved version of the rectifiers. The PARS-EL series rectifiers are heavy duty power sources for critical welding in shos and all weather field conditions.
The PARS-EL  series are three phase, electronic controlled. This system allows to have a stabilized output current, easy striking and easy controlled molten pool. Thanks to a particular anti-stick device, if any excessive temperature, short circuit or the possible sticking of the electrode should take place, the current is reduced to it's minimum value.
Once the short circuit is eliminated, the normal operating conditions are immediately reset. 
The PARS-EL 800 is optimized for arc-air gouging which is a way of removing welding defects, preparation of root runs and for other forms of weld preparation.

EXCELLENT FEATURES OF PARS-EL

  • Infinitely variable, continues regulation. Adjustment can be made during welding. 
  • A stable, spatter free are and an easily controlled molten  pool.
  • Electronic controlled characteristic provides constant   welding current regardless of cable length, arc  voltage, mains voltage variation. 
  • Excellent striking capabilities. 
  • Suitable for all kinds of electrodes including cellulosic,  basic,... 
  • Anti-stick system. 
  • Overload, short circuit protection. 
  • High efficiency, High power factor and low mains current. 
  • Fan cooled, four wheels, lifting eyelets, Dinse system socket.

PARS-EL, Welding Rectifier
You Can Trust

OPTIONAL:

  • Remote control. 
  • Arc force. 
  • Hot start. 
  • Offshore type. 
  • TIG / DC version for: PARS-EL 300,400,600 series
  • Electrod oven
  • Welding glove, protective mask

GAMM ELECTRIC  Can Supply PARS-EL Welding Rectifires From 300 Till 1000 Ampers.

PARSMIG series are designed to meet the needs of heavy  duty production , handles welding wires from 0.6 mm. to 1.6 mm. 
Typical applications are industrial and structural steel work,  car industry, for welding tube sheets and thick sections. 
For these power source one needs a wire drive unit  PARSFEED, 
The unit is removable which allows for maximum reach for 
awkward places. 
The PARSFEED are with RPM feedback control, gas test, 
wire test, spot welding, latching controls, 2 or 4 rolls. 
GAAM ELECTRIC has laid down new standards for  MIG/MAG industrial welding machines through the static  characteristic. Their characteristic suit them welding in the  vertical, overhead and in any position.

PARSMIG Gas-Metal Arc 
Welding Machines (MIG/MAG) 

GAAM ELECTRIC Can Supply PARSMIG Welding MachinesTill 600 Ampers
 

PARSFEED Wire Feeders PARSFEED are wire feeders with a powerful motor.  They have specially designed to meet the demands of feeding hard wires and cored wires from 0.6 - 1.6 mm and 1-20 m/min. The solid construction of wire drive system has been designed for trouble free feeding of solid and cored wires.  The PARSFEED are with RPM feed back control, soft start, latching, burn back and spot welding controls, open or enclosed, 2 rolls or 4 rolls, for air cooled or water cooled system. 

ACCESSORIES: 

  • All welding and control Cables including earth clip.

OPTIONAL: 

  • Swivel arm wire feeders.
  • Four Wheels for wire feeder.
  • Water cooled / air cooled wire feeder.
  • Enclosed / open wire feeder.
  • Programmable wire, feeder.
  • Cooling unit.
  • Water cooled torch.
  • Gas preheater.

Sales office: 
No.92, 7th. St., Northern Karegar, Tehran-Iran
Tel: +98 (21) 801 2984, 801 0966 
Fax: +98 (21) 802 7940
Factory (Foreign Contact):
P.O.Box: 48175-385, Sari-Iran
Tel: +98 (151) 21587 
Fax: +98 (151) 21587

Iran-Export Home Page Search About The Site About Payam Afshan 

  Send mail to payam@iran-export.com with questions or comments about this web site.
Copyright © 1998 Payam Afshan Co.